Sigfox WSSFCEX-PPS, Руководство пользователя

Страница: 2 / 23

STEP 2: Check ID and PAC
Use Modbus Configuration Cable to read the ID and PAC values Refer to register address 8 and 10 (DEC)
STEP 3: Configure the sensor's operating parameters
Configure parameters like cycle send data, alarm, a, b,... Refer to the configuration section 5 and section 6
STEP 4: Add device to Backend Sigfox
refer to section 5.2 for details
STEP 5: Installation
refer to section 7 for details
Document Ver. Release Date Change log
1.0 SEP-2020 - First version for WSSFCEX-PPS
1.1 FEB-2022 - Update information of WSSFCEX-PPS-G-1000
WSSFCEX-PPS is the Sigfox Integrated Process Pressure Sensor with Exd approval for installation in Zone 1, Zone 2 or
Safe Zone, and it has different kinds of measurements, such as Gage/Absolute/Sealed Gage, range -1 .. + 700 bar, high
accuracy, and stability. With Ultra-low-power design and smart firmware allow the sensor can last up to 10 years with
single C battery (depends on configuration). It can supports all regions of Sigfox network in over the World, RC1, RC2,
RC3, RC4, RC5, RC6, RC7. Typical applications are pressure monitoring of oil pipeline, gas pipeline, LPG tank, CNG
tank, etc.
1. Change Log
2. Introduction