SifWeld MTS 200, Руководство пользователя

Страница: 8 / 33

TSX1D200MTS V1 FEB13 - 8 -
4. Install wire spool, by unscrewing the plastic retainer and placing the wire spool onto the spool hub.
5. Release the pressure arm.
6. Feed the wire into the guide tube, and through the wire feed roll. Set the correct pressure on the arm,
and fit back into place.
Ensure that the pressure is enough to hold the wire in place, however not too
much as this will deform the wire.
7. Insert the MIG gun onto the front of the machine, and feed the wire through into the gun.