SifWeld MTS 200, Руководство пользователя

Страница: 7 / 33

TSX1D200MTS V1 FEB13 - 7 -
4 Installation
The SifWeld MTS200 is equipped with a network voltage compensation device, this ensures that when the
network voltage changes within the 15% range, the machine can still continue to work.
The cross-sectional area of any extension cable must be above the cross-sectional area of the machines
mains input cable to minimise voltage drop.
Prior to installation, check the following:
•
Confirm both air-vents are no covered, obstructed or blocked otherwise this could result in failure of
the cooling system
•
Ensure the machine is connected to a suitable grounded mains supply
Installation for MIG Applications
1. Connect to a suitable cylinder with required regulator and gas hose.
2. Select desired polarity via the quick-connect sockets on the front of the machine.
3.
Select the MIG function via the switch inside the machine.
Fit the correct wire feed roll, and screw into place.