Page 6/44
1- 4.2 Connections
J1 – Genset AC voltage and contactors
1.1 - Mains contactor output (NC)
1.2 - Mains contactor output (NC)
1.3 - Genset contactor output (NO)
1.4 - Genset contactor output (NO)
1.5 - Genset voltage phase 1
1.6 - Genset voltage phase 2
1.7 - Genset voltage phase 3
1.8 - Neutral
J2 – Mains AC voltage
2.1 - Mains voltage phase 1
2.2 - Mains voltage phase 2
2.3 - Mains voltage phase 3
2.4 - Neutral
J5 – Supply and Outputs
5.1 - Battery negative
5.2 - Battery positive
5.3 - Common positive for the relay outputs
5.4 - Programmable output (default – Start)
5.5 - Programmable output (default – Faulty start)
5.6 - Not used
5.7 - Not used
5.8 - Programmable output (default – Global alarm #1)
5.9 - Programmable output (default – Auto mode)
5.10 - Programmable output (default – Manual mode)
5.11 - Programmable output (default – Siren)
RS232 - Communication ports
RS232 - connection of a remote device
J8 - RS485 port
1- Shield
2- A
3- B
4- Termination resistor
J3 – Genset AC current
3.1 - Genset current I1
3.2 - Genset current I2
3.3 - Genset current I3
3.4 - CT common
J4 – Digital inputs
4.1 - Gnd
4.2 - Gnd
4.3 - Gnd
4.4 - Programmable digital input (default – Electrical Trip)
4.5 - Programmable digital input (default – Ground protection)
4.6 - Programmable digital input (default – Remote start)
4.7 - Programmable digital input (default – Remote stop)
4.8 - Programmable digital input (default – Ext. GE protection)
