Siemens WM4HU SERIES, Инструкция по эксплуатации и руководство по установке

Страница: 40 / 56

en
Home Connect
40
3.
Set the programme to position 4.
’©Ÿ
(Wi-Fi function) will appear on
the display.
4.
Press
I
.
If
©Ÿ
(switched on) appears on the
display, the Wi-Fi function on the
appliance has been activated. If
©””
(switched off) appears on the
display, the Wi-Fi function is not active.
5.
Press
}
briefly to exit the Home
Connect settings.
Notes
■
If Wi-Fi is switched off on the
appliance, the appliance cannot be
connected to your home network or
the app.
■
If Wi-Fi is switched on on the
appliance, when it is in Energy
saving mode, the appliance will not
automatically switch itself off.
■
If Wi-Fi is switched on on the
appliance and you wish to switch it
off, you must perform all these steps
again.
Resetting your network
settings
You can clear the network settings and
break the connection to your
smartphone or tablet PC by resetting
the network settings.
1.
Switch on the appliance.
2.
Press and hold
}
for at least
3 seconds.
‘ž£
(connect automatically) will
appear on the display.
3.
Set the programme to position 5.
§“à
(reset network settings) will
appear on the display.
4.
Press
I
.
¢“à
(yes) will appear on the display.
5.
Press
I
within the next 10 seconds
to confirm
¢“à
(yes).
Note:
If this is not confirmed within
10 seconds, the settings for the
network are not reset.
“Ÿš
(end) will appear on the display.
The network settings have now been
reset. Your appliance is no longer
connected to your home network or the
Home Connect app.
6.
Press
}
briefly to exit the Home
Connect settings.
Notes
■
If the network settings could not be
reset,
“§§
(fault) will appear on the
display.
■
If you want to operate the appliance
via the Home Connect app again,
you will need to reconnect it to your
home network and to the
Home Connect app either
automatically or manually.
Updating the software
You can update the Home Connect
software on your appliance. Whenever a
new update is available,
ž˜š
(update)
will appear on the display.
You can install the update directly via
the message on the display or,
alternatively, you can do this manually.
#
+
3
;
#
+
3
;