en
Intelligent dosing system
36
Below is an example of detergent
dosages on a packaging label:
The default setting for the basic dosage
is set specifically according to the area
in which you live (e.g. 75 ml for
detergent and 36 ml for fabric softener).
Set the basic detergent dosage
according to the detergent's packaging
label. Take your water hardness into
consideration when doing so.
Select the basic fabric softener dosage
according to how soft you would like
your laundry to be.
Changing one basic dosage affects all
three dosage quantities in the same
way.
Notes
■
Reduce the basic dosage if using a
very concentrated detergent.
■
If large amounts of foam are
repeatedly created during washing,
please check your basic dosage and
dosage quantity settings.
Certain types of liquid detergent can
also create excessive amounts of
foam. If your basic dosage and
dosage quantity settings are correct,
we advise you to use a different
detergent.
Changing the basic dosages:
1.
Touch and hold the corresponding
ß
i-Dos
or
M
i-Dos
button for
approx. 3 seconds. The preset basic
dosage will appear in the Touch-
Display.
2.
Set the required basic dosage using
the
ª
or
˜
buttons.
3.
The setting is activated without
needing to be confirmed. You can
touch
i-Dos
buttons to revert to the
original setting.
Note:
The settings are saved until
they are changed again, even if the
appliance is switched off.
Manual dosage
For programmes that cannot be used
with intelligent dosage, or if you would
prefer to dose manually (in which case
set intelligent dosage to "off"), add
detergent to left-hand compartment.
Cleaning aids such as water softener,
bleach and stain remover can be added
to this compartment in addition to the
intelligent dosage.
:
Warning
Eye/skin irritation!
Detergent and care products may spray
out if the detergent drawer is opened
while the appliance is in operation.
Open the drawer carefully.
Rinse eyes or skin thoroughly if they
come into contact with detergent/care
products.
If swallowed accidentally, seek medical
advice.
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the appliance.
Do not allow these agents to come into
contact with the surfaces of the
appliance. If necessary, immediately
wipe away spray residue and other
residues/droplets with a damp cloth.
Degree of
soiling
→
Water hard-
ness
↓
light
normal
heavy
very heavy
soft/medium
55 ml
75 ml
120 ml 160 ml
hard/very hard 75 ml
95 ml
150 ml 180 ml
