en
Operating the appliance
32
Childproof lock
(
w
3 sec)
You can lock the appliance to prevent
the functions you have set from being
changed inadvertently in the control
panel.
To activate the childproof lock:
After the programme starts, touch and
hold the
w
3 sec
button for approx.
three seconds. The display switches to
full brightness.
If you touch the control panel while the
childproof lock is activated, the
w
3 sec
indicator will flash briefly and
a signal will sound. The programme
runs through to the end unchanged.
Note:
When the programme ends,
End
is displayed. The door is closed.
w
3 sec
indicator still lights up and
Œ
symbols remain on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the
w
3 sec
button
until the indicator turns off.
Notes
■
To remove the laundry at the end of
the programme, deactivate the
childproof lock.
■
The childproof lock remains active,
even once the appliance has been
switched off.
■
If the appliance is switched off while
the programme is running and
childproof lock is activated, the
programme continues when the
appliance is switched back on.
Adding/removing laundry
After starting the programme, you can
add or remove laundry if necessary.
Touch the
I
button. The appliance
checks whether reloading is possible.
If the following appears on the Touch-
Display:
■
The symbol
Œ
disappears, reloading
is possible.
■
The symbol
Œ
lights up, reloading is
not possible.
To continue the programme, touch the
I
button. The programme continues
automatically.
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Touch the
I
button.
2.
Select another programme.
3.
And touch the
I
button again. The
new programme starts from the
beginning.
