Siemens VersiCharge AC, Быстрое руководство по установке

Страница: 15 / 24

APPENDIX B – System Operation/Faults
Operating and Fault Light States After a Charger has been Added
Display Description Action
Normal Operation
Applicable to Commercial units,
only if RFID is enabled.
Charger is locked. Pass RFID card in front of reader to unlock and begin
charging.
Applicable to Commercial units,
if RFID is enabled.
Charger is unlocked Enable RFID authentication. To unlock pass an RFID
card over the RFID reader.
NOTE: The charger is in the unlocked state by default.
Lights up white
Charging station is ready
LED off
Charging Paused. Charging can be resumed through the Mobile App.
Lights up white
Vehicle connected
Lights up white
Charging in progress
Flashes white
After switch on, the charger will
go to Access Point mode Connect PC or mobile device for commissioning, charger
is ready to be added to the account
Lights up red
No Wi-Fi Check the router
Lights up orange
Charger is connected to router.
Weak Wi-Fi. Strengthen the Wi-Fi.
16
VersiCharge™ AC Electric vehicle charging station