Siemens VersiCharge AC, Быстрое руководство по установке

Страница: 4 / 24

Equipment List
Standard Installation – What you will need:
Certified Electrician (Recommended)
Cordless Drill (Phillips Bit with extender)
– include 1/8” drill bit for pilot holes Stud Finder Level
240 V AC Voltmeter NEMA 6-50 Outlet (Only used for the
40A residential charger) 7/16” Socket wrench
Flathead Screwdriver
NOTE: If using the Alternate
Installation, a Phillips Head
Screwdriver will also be needed.
#6 AWG 90 ° C copper wire should be used
for 48A charger and #8 AWG 90 ° C copper
wire should be used for a 40A charger.
NOTE: 1. Wire must have a temperature
rating of 90
° C or higher). 2. Do not set the
amp switch higher than 40A unless hard-
wired to a dedicated 60A branch protection
circuit breaker.
40A charger requires a 2-pole, 240V,
50A circuit breaker. 48A charger requires
a 2-pole, 240V, 60A circuit breaker.
Installation kit
5
VersiCharge™ AC Electric vehicle charging station