DSL/Cable Router User Guide
4
Physical Details
LEDs
The front panel contains the following LEDs.
Power
On
- Normal operation.
Off
- No power
Status
On
- Error condition.
Off
- Normal operation.
Blinking
- This LED blinks during start up, or when the Firmware is being
upgraded.
LAN Ports
(1, 2, 3, 4)
For each LAN port, there are 2 LEDs
•
Link/Act
•
On
- Corresponding LAN (hub) port is active.
•
Off
- No active connection on the corresponding LAN (hub) port.
•
Flashing
- Data is being transmitted or received via the corre-
sponding LAN (hub) port.
•
100
•
On
- Corresponding LAN (hub) port is using 100BaseT.
•
Off
- Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
WAN Port
Flashing
- data is being transmitted or received via the WAN port.
Off
- no data is being transferred.
Wireless
On
- Wireless connection available; Wireless Access Point is ready for
use.
Off
- No Wireless connection available.
Flashing
- Data is being transmitted or received via the Wireless access
point. This includes "network traffic" as well as user data.
Print Act
On
- Connection to printer established.
Off
- No connection to printer; printer is Off or Off-line.
Flashing
- Data is being transmitted to the printer.
Print Err
On
- Printer error detected.
Off
- No printer error detected.