background image

DSL/Cable Router User Guide

8

The wired LAN connection, rather than the Wireless
interface, is preferred for first-time router setup.
Once the Wireless configuration is correct, the Wireless
interface can be used for any further configuration.

3. Connect WAN Cable

Connect the DSL or Cable modem to the WAN port on the DSL/Cable Router. Use the ca-
ble supplied with your DSL/Cable modem. .

4. Attach Antenna

Attach the supplied wireless antenna to the connector provided on the back of the
DSL/Cable Router. Secure the antenna by turning the grooved or ridged ring on the an-
tenna until snug (Do not over tighten).

5. Connect Printer Cable

Use a standard parallel printer cable to connect your printer to the Printer port on the
DSL/Cable Router.

6. Power Up

 

Power on the Cable or DSL modem.

 

Power on the Printer.

 

Connect the supplied power adapter to the DSL/Cable Router and power up.
Use only the power adapter provided. Using a different one may cause hardware damage

7. Check the LEDs

 

The 

Status

 LED should flash, then turn On. If it stays On, or flashing, there is a hardware

error.

 

For each active LAN (PC) connection, the LAN 

Link/Act

 LED should be ON

 

The 

WAN

 LED should be ON.

 

The 

Wireless

 LED should be ON.

 

The 

Print Act

 LED should be ON.

For more information, refer to LEDs in Chapter 1.

Содержание SpeedStream SS2624




























































































Отзывы: