Siemens SIWAREX FTA, Руководство по эксплуатации устройства

Страница: 74 / 207

Weighing Functions
SIWAREX FTA
5-62
Name Type Address Default Range of Values / Explanation Reference
Empty range REAL DBD012 1
Wizzard:
WB
max
*0,01
For filling procedures this depends on
parameters, for emptying procedures relative to
gross
5.5.14
Start-up weight limit
value 1
REAL DBD016 1
Wizzard:
WB
max
*0,01
5.5.15
Shut-down weight limit
value 1
REAL DBD020 1,1
Wizzard:
WB
max
*0,01
1
5.5.16
Start-up weight limit
value 2
REAL DBB024 50
Wizzard:
WB
max
*0,5
5.5.17
Shut-down weight limit
value 2
REAL DBB028 49
Wizzard:
WB
max
*0,49
5.5.18
Start-up weight limit
value 3
REAL DBB032 99
Wizzard:
WB
max
*0,99
Limit value 3 corresponds with overfill limit 5.5.19
Shut-down weight limit
value 3
REAL DBB036 98
Wizzard:
WB
max
*0,98
5.5.20
Through-put
Minimum through-put
Limit value 1
REAL DBB040 0 0: No monitoring
> 0 minimum through-put [1/sec]
5.5.21
Minimum through-put
Limit value 2
REAL DBB044 0 0: No monitoring
> 0 minimum through-put [1/sec]
5.5.22
Filter depth of
average value filter for
through-put calculation
BYTE DBB048 5 [0...255] X 10 msec 5.5.23
Reserve 5 BYTE DBB049 0 Reserve 5
50
Table 5-2 DR4 Allocation
5.4.1 DR 4 - Scale operating mode (Scale type)
This parameter is used to select the suitable weighing instrument program. One
of these weighing operating modes applies depending on the task description.
5.4.2 DR 4 - Type: weighing (additive)
Non-automatic weighing instrument – according to OIML R-76 – only accepts
service and adjustment commands and “zero setting” and “taring” weighing
instructions. The net weight increases with increasing load on the scale. No dosing
functions are supported.
5.4.3 DR 4 - Type: weighing (subtractive)
Non-automatic weighing instrument – according to OIML R-76 – only accepts
service and adjustment commands and “zero setting” and “taring” weighing
instructions. The net weight increases with decreasing load on the scale.
No dosing functions are supported.