manualshive.com logo in svg

Siemens SITRANS L Series, Руководство по эксплуатации, Страница: 26 / 106

Поделиться
Скачать
Siemens SITRANS L Series Скачать руководство пользователя страница 26

Installing/mounting

4.3 Measurement setup - Flow

Agitators

If there are agitators in the vessel, a auto false echo suppression should be carried

out with the agitators in motion. This ensures that the interfering reflections from

the agitators are saved with the blades in different positions.

Figure 4.9

Agitators

Foam generation

Through the action of filling, stirring and other processes in the vessel, compact

 

foams which considerably damp the emitted signals may form on the medium

 

surface.
If foams lead to measurement errors, you should use transmitters with guided 

radar.

4.3

Measurement setup - Flow

In general, the following must be observed while mounting the device:
• Mounting the transmitter on the upstream or inlet side
• Installation in the centre of the flume and vertical to the liquid surface
• Distance to the overfall orifice or Venturi flume
• Min. distance to the max. height of damming for optimum accuracy: 250 mm

(9.843 in) 

1

Detailed project planning data can be found at the channel manufacturers and in the

technical literature.
The following examples serve as an overview for flow measurement.

1

At smaller distances the measuring accuracy is reduced, see "Technical data".

SITRANS LR150

Operating Instructions, 08/2020, 

A5E50352155

17

Содержание SITRANS L Series











































































































Отзывы:

Нет отзывов