manualshive.com logo in svg

Siemens SITRANS L Series, Руководство по эксплуатации, Страница: 23 / 106

Поделиться
Скачать
Siemens SITRANS L Series Скачать руководство пользователя страница 23

Installing/mounting
4.2 Mounting instructions

The polarization direction is marked on the housing, see following drawing:

 1    

Marking of the polarisation

Figure 4.1

Position of the polarisation

Note

When the housing is rotated, the direction of polarization changes and hence the

influence of the false echo on the measured value. Please keep this in mind when

mounting or making changes later.

Reference point

The centre of the antenna lens is the beginning of the measuring range and at the

same time the reference point for the min./max. adjustment, see following diagram:

 1    

Reference point

Figure 4.2

Reference point

Installation position

When mounting the device, keep a distance of at least 200 mm (7.874 in) from the

 

vessel wall. If the device is installed in the center of dished or round vessel tops,

 

multiple echoes can arise. However, these can be suppressed by an appropriate

 

adjustment (see chapter " 

Set up

"

).

If you cannot maintain this distance, you should carry out a auto false echo

 

suppression during setup. This applies particularly if buildup on the vessel wall is

 

expected. In such cases, we recommend repeating the auto false echo suppression at

 

a later date with existing buildup.

14

SITRANS LR150

Operating Instructions, 08/2020, 

A5E50352155

Содержание SITRANS L Series











































































































Отзывы:

Нет отзывов