manualshive.com logo in svg

Siemens SITRANS FX330, Руководство по эксплуатации, Страница: 94 / 116

Поделиться
Скачать
Siemens SITRANS FX330 Скачать руководство пользователя страница 94

7

 SERVICE 

94 

SITRANS FX330

www.siemens.com/flow

05/2016 - A5E36751269-AA

7.3  Spare parts availability

The manufacturer adheres to the basic principle that functionally adequate spare parts for each 
device or each important accessory part will be kept available for a period of 3 years after 
delivery of the last production run for the device.

This regulation only applies to spare parts which are subject to wear and tear under normal 
operating conditions.

7.4  Availability of services

The manufacturer offers a range of services to support the customer after expiration of the 
warranty. These include repair, maintenance, technical support and training.

7.5  Return procedure

If the original packaging is no longer available, ensure that all shipments are properly packaged 
to provide sufficient protection during transport. Siemens cannot assume liability for any costs 
associated with transportation damages.

Special conditions for storage and transportation of the device are listed in AUTOHOTSPOT.

Enclose the bill of lading, return document and decontamination certificate in a clear plastic 
pouch and attach it firmly to the outside of the packaging.

INFORMATION!

For more precise information, please contact your local sales office.

CAUTION!

Insufficient protection during storage

Insufficient protection during storage

Insufficient protection during storage

Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.

•

Provide additional packaging as necessary.

Содержание SITRANS FX330





















































































































Отзывы:

Нет отзывов