Siemens SITRANS FUH1010PVDX, Руководство по эксплуатации, Страница: 65 / 308

2-27
CQO:1010PVXFM-3
Section 2
After you finish typing the string, press <ENT> to register it. This creates a new site setup called [SITE1].
This action prepares the FUH1010PVX for installation by loading default parameters in all the appropri-
ate menu cells. Note that the [Recall Site] menu cell shows: [No Sites] and that the [Save/ Rename Site]
menu cell now lists the site name. Although, you just created site setup SITE1, it will not be permanently
stored until you invoke the [Save/Rename Site] command.
2.8.2 SELECTING ITEMS FROM AN OPTION LIST
Examine the screen below. It shows how to use an option list to select a Relay Setup for your applica-
tion. How to access this menu will be explained later. Note that the menu name [I/O Data Control]
appears highlighted on the lower left of the screen. Note also that the menu cell [Relay Setup] is high-
lighted.
Note that the right-hand column has no data at this time.
Siemens Site [1]
Recall Site Setup No Sites
Channel Enable No
Create/Name Site ?SITE1
„ „ „ „ „
Site Security Off Flow
Delete Site Setup No Sites
Save/Rename Site
Right arrow & Enter Creates a new Site
Channel Setup
Siemens Site [1] SITE1
Recall Site Setup No Sites
Channel Enable No
Create/Name Site SITE1
Site Security Off
Delete Site Setup No Sites
Save/Rename Site SITE1
Use with Care -- Turn Security On or Off
Channel Setup
Siemens Site [1] SITE1
Analog Setup
Relay Setup
Assign Alarm Data function to each relay
I/O Data Control