Siemens SITRANS FUH1010PVDX, Руководство по эксплуатации, Страница: 107 / 308

5-5
CQO:1010PVXFM-3 Section 5
To scroll the option list to [On] press then . [Enter Code?] appears at the top of
the display screen.
Type your password on the PC keyboard, use numeric keys, or press with the Mag-
netic Wand to select the first character.
To move the cursor to the second character position press .
Repeat the selection process for the second character. Continue this process until all the re-
quired characters (8 max.) appear in the field.
To store code press . [Confirm Code ?] appears at top of the display screen. Retype code
exactly as described above.
Press . This moves the cursor to the [Site Security] option list.
To scroll the option list to [Site Security: On] press the . Once you turn on Site Security,
you must enter the correct code to turn it off.
To activate Site Security press .
5.1.5 HOW TO DELETE A SITE SETUP
If you attempt to save a Site Setup when memory is full, the screen will show [Memory Full]. If you get
this message after issuing a Save/Rename Site command, you’ll have to delete an unneeded Site Setup
to clear memory space. The Datalogger and Site Storage share a common memory pool, so a large
amount of logged data could also trigger the [Memory Full] message. For how to clear Datalogger
memory, see [Meter Facilities/Datalogger Control]. The Defragment Command may also secure more
memory (see Meter Facility/Memory Control Menu).
To delete a stored Site Setup:
To highlight [Delete Site] press .
To access the Delete Site option list press .
Move the cursor to the site name of the site setup you want to delete.
To delete the obsolete site setup press .
5.1.6 HOW TO SAVE/RENAME A SITE SETUP
The Save/Rename Site command copies data from Active Memory to the Site Storage Memory. Saved
Site Setups can be recalled for future use. This menu cell allows you to save a Site Setup at any time
during the programming process. However, you must recall and complete the Site Setup in order to
achieve operation.
When you access the Save/Rename Site menu cell, the name of the most recently created Site Setup
(see Create/Name Site) appears automatically. If this name is acceptable, you can press <ENT> to save
the Site Setup. You can change the listed site name by following the procedure below. You may select up
to eight characters. If you decide to use numbers or a decimal point in the site name, you can also type
these characters directly from your PC keyboard.
ENT
ENT
ENT
ENT
ENT