Siemens SITRANS F TRANSMAG 2, Руководство по эксплуатации, Страница: 100 / 126

4.2.5 Fullsc. Freq Frequency output at full scale flow value at
digital output 1 (only effective for "Frequen‐
cy" function) 10000 Hz
2 ... 10000 Hz
4.3 Digit.Output2 1
4.3.1 Function Assignment of a function to digital output 2
’Split value active’: the active output indi‐
cates a current flow value in the 0 to ’Split
value’ range (not effective for PROFIBUS). Alarm
• Alarm, Flow dir. forw.,
• Flow min, Flow max,
Flow min/max,
• Total. forw. max,
• Total. rev. max,
• Total. net max,
• Total. net min,
• Split value active,
• No function
4.3.2 Signal type Definition of signal logic for active event Contact closes
• Contact closes
• Contact opens
4.3 Digit.input
2
4.3.1 Function Assignment of a function to the input:
Measured value=0:
Measured value is set to 0 (affects all out‐
puts and totalizers)
Totalizer reset: reset+start Measured value
= 0 • Meas. val. = 0,
• Total. forw. reset,
• Total. rev. reset,
• Total. net reset,
• Total. all reset,
• No function
4.3.2 Signal Type Definition of signal logic High-active
• High-active,
• Low-active
1)
Parameters apply only to devices with 20 mA/Hart communication and digital output 2 (7ME5034-0xxxx)
2)
Parameters apply only to devices with 20 mA/Hart communication and digital input (7ME5034-2xxxx)
3) Parameters apply only to devices with PROFIBUS communication (7ME5034-1xxxx)
Identification
Table A-5 Function group Identification parameters
5.1 Funct. Unit
5.1.1 Tag Tag number (Customer-spe‐
cific) Text max.:
• 32 characters 3 /
• 8 characters 1,2
5.1.2 Descriptor Tag descriptor (Customer-spe‐
cific)
DN 2...12: l
DN >12: m
3
Text max.
• 32 characters 3
• 16 characters 1,2
5.1.3 Message Tag message (Customer-spe‐
cific) Text max. 32 characters
5.2 Manuf.Ident.
Parameters
TRANSMAG 2 with MAG 911/E
100
Operating Instructions, 03/2021, A5E00102775-AC