Safety
6
Siemens Building Technologies
Fire Safety & Security Products
03.2009
2 Safety
2.1
Target readers
The instructions in this document are designed for the following target readers:
Operational startup personnel
Qualification
Activity
Condition of the equipment
Technical training for building or
electrical installations.
Puts the product into operation
for the first time.
The product is not yet installed
and configured.
2.2
Work safety information
2.2.1
General information
z
Read the general safety precautions before operating the device.
z
Follow all warnings and instructions marked on the device.
z
Keep this document for reference.
z
Always pass this document on together with the product.
z
Any national or local safety standards or laws that apply to the development,
design, installation, operation or disposal of a product must be adhered to in
addition to the instructions in the product documentation.
Liability claim
z
Do not connect the device if it is damaged or any parts are missing.
z
Do not make any changes or modifications to the device unless they are ex-
pressly mentioned in this manual and have been approved by the manufacturer.
Unauthorized changes will void the user's authority to operate the equipment.
z
Use only spare parts and accessories approved by the manufacturer.
Burn hazard
Do not touch the housing of the device while it is in operation
Radio interference with other devices in the environment
z
This is a Class A device. This equipment may cause radio interference in a
residential installation. In this case the user is encouraged to perform
appropriate measures to correct the interference.
2.2.2
Transport
Damage during transport
z
Keep the packaging material for future transportation.
z
Do not expose the device to mechanical vibrations or shocks.
z
Do not carry two or more HDDs with one stacked on top of another.
z
Do not let HDDs bump against each other.
z
Do not leave the HDD in a vertical position without putting it in a container.
