Installation and replacement of hard disk drives
16
Siemens Building Technologies
Fire Safety & Security Products
03.2009
6
Installation and replacement of hard disk drives
This chapter describes the procedures to replace faulty HDDs and install
extensions HDDs in the SISTORE AX. Independent of the AX model, in either case
the HDD shall be replaced by the standard HDD model (currently Hitachi 250 GB).
6.1
Replacement of the primary HDD in SISTORE AX4 Lite V2.0
This chapter describes the installation of a HDD unit into the housing of a Digital
Video Recorder of type SISTORE AX4 Lite.
1.
First shutdown the device and
disconnect from the power supply.
2.
Remove the screws marked in the
picture on the side (2) and on the rear
of the SISTORE AX (3).
3.
Lift up the housing cover at the rear of
the SISTORE AX, and lift it off.
