Overview
4.5 Types of 3SU1 actuating elements and signaling elements
SIRIUS ACT 3SU1 pushbuttons and signaling devices
38
System Manual, 08/2018, A5E03457306020A/RS-AK/010
4.5.4
3SU14 modules
The contact modules are equipped with a slow-action contact (1 NO contact or 1 NC
contact). These ensure a high contact stability even with small voltages and currents
(e.g., 5 V/1 mA).
Figure 4-3
Example: 3SU1400-2AA10-1BA0 contact module
Connection system
Devices with the following connections are available:
● Screw terminals with open terminal points, captive screws, funnel
-shaped cable entries
and screwdriver guides
● Spring
-loaded terminals for vibration-resistant connection
● Solder pin connection (0.8 mm × 0.8 mm solder pins)
4.5.5
Design of a 3SU10 and 3SU11 command point
A modular command point consists of the following elements:
●
An actuating or signaling element in front of the front plate
●
A holder for securing behind the front plate
●
Up to three contact modules in a row (four in the case of 4-slot holders) and / or two
contact modules and one LED module (3-slot holders only) behind the front plate
●
A maximum of 3x 2 (1-pole) contact modules can be stacked with a 3-slot holder
●
A maximum of 4x 2 (1-pole) contact modules can be stacked with a 4-slot holder
●
A comprehensive range of accessories for labeling
Mounting and stacking of the modules on a 3-slot holder
With SIRIUS ACT, the modules are mounted on the holder without any further accessories.
The modules can be stacked without needing to use a tool (max. 2x 1-pole modules behind
one other).