Siemens SIRIUS ACT 3SU1 Скачать руководство пользователя страница 213

Страница: 213 / 610

SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010

213

3SU15 holders

9.1

Holders

The holders are used to secure the actuating or signaling elements and the contact module

or LED module. The holders are designed for mounting in front plates with a plate thickness

of 1 to 6 mm.
When delivered, the holders are set to a front plate thickness of approximately 4.5 mm. They

are placed in the

↑ arrow direction from the rear onto the actuating and signaling elements.

The fastening screw is located at the top. If they are to be mounted on a front plate that is >

4.5 mm thick, you must adjust the fastening screw of the holder before you install the holder.

Note
Note the maximum permissible front plate thickness!
When label holders, protective caps or similar accessories are used, it is important to

remember that the maximum permissible front plate thickness must be reduced by the plate

thickness of the relevant accessory.

Tool
For securing, we recommend a size 2 screwdriver (cross-tip DIN ISO 87641PZ1 or flat-head

DIN ISO 2380-1 A/B 1x 4.5). The tightening torque is 1.0 to 1.2 Nm.

Grounding of the front plate
If you mount a metal actuator on a metal front plate using a metal holder, the actuator is

grounded via the tip of the fastening screw. This enables grounding via the connection on

the front plate.
If the metal holder is to be used several times, grounding via the grounding stud is

recommended!

①

Hole for grounding stud (accessory: 3SU1950-0KK80-0AA0)

②

Fastening screw

Содержание SIRIUS ACT 3SU1



































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SIRIUS ACT 3SU1

Отзывы:

Siemens SIRIUS ACT 3SU1, Системное руководство, Страница: 213 / 610

Результаты поиска

Содержание SIRIUS ACT 3SU1

Отзывы: