Table of contents
SIPIX MO/SD ZN
Entry-ID: 109792654, 04/2021
15
©
S
iem
e
n
s A
G
2021
A
ll r
igh
ts
re
se
rv
e
d
3
Safety Information
3.1
General Safety Information
•
Do not change or charge a battery in a potentially explosive area.
•
General legal regulations or directives on occupational safety, accident
prevention regulations, and environmental protection laws must be observed,
such as the operational safety ordinance (BetrSichV) or applicable national
regulations.
•
Wear suitable clothing and footwear in view of the risk of dangerous
electrostatic charges.
•
Avoid heat effects outside the specified temperature range.
•
Protect the device from external influences! Do not expose the unit to corrosive
liquids, vapors or spray mist!
•
In the event that the device malfunctions or the housing is damaged,
immediately remove it from the potentially explosive area and move it to a safe
place.
3.2
Notes on this User Manual
Read carefully before commissioning the devices:
The user manual contains important notes, safety instructions and test certificates
required for the proper functioning of the device during operation.
The user manual is intended for all persons involved in the commissioning,
handling and maintenance of the product. When carrying out this work, the
applicable directives and standards for areas with gas and dust atmospheres
(99/92/EG, EN 60079-17, EN 60079-19, IEC 60079-17, IEC 60079-19) must be
observed.
Knowledge of the safety and warning instructions in this user manual and their
strict observance are essential for safe commissioning and handling. Accidents,
injuries and damage to property can be avoided by careful handling and consistent
adherence to the instructions.
The illustrations in this user manual are intended to illustrate the information and
descriptions. Due to the different requirements of the respective application,
SIEMENS AG cannot assume any responsibility or liability for the actual use of the
products on the basis of these examples and illustrations.
SIEMENS AG reserves the right to make technical changes at any time.
SIEMENS AG is under no circumstances responsible or liable for indirect or
consequential damages resulting from the use, application or application of this
user manual.