Siemens SIPART PS2 6DR5xx0 series Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 57

background image

SIPART PS2 (6DR5...)

10

A5E03436620-AB, 01/2017

WARNING

Mechanical impact energy
In order to ensure the degree of protection of the housing (IP66), protect the housing versions of the positioners listed here

from mechanical impact energy:

•

6DR5..3; not greater than 2 Joule

•

6DR5..0; not greater than 1 Joule

•

6DR5..1 with inspection window; not greater than 1 Joule

NOTICE
Torque with NPT screwed gland
Device damage. The maximum torque of the cable gland must not be exceeded.

•

To avoid damage to the device, the NPT adapter must be held in place while the NPT gland is screwed into the NPT

adapter. Refer to the section "Technical specifications > Construction (Page 40)" for the torque value.

3.1.1

Proper mounting

NOTICE
Incorrect mounting
The device can be damaged, destroyed, or its functionality impaired through improper mounting.

•

Before installing ensure there is no visible damage to the device.

•

Make sure that process connectors are clean, and suitable gaskets and glands are used.

•

Mount the device using suitable tools. Refer to the information in Construction (Page 40) for installation torque

requirements.

CAUTION

Loss of type of protection
Damage to device if the enclosure is open or not properly closed. The type of protection specified on the nameplate or in

Technical data (Page 38) is no longer guaranteed.

•

Make sure that the device is securely closed.

3.2

Mounting the linear actuator

For linear actuators, use the "linear actuator" mounting kit 6DR4004-8V or the integrated attachment.
You require different installation parts depending on the selected actuator type. The mounting kit is suitable for a stroke of 3

to 35 mm. For a larger stroke range, you require a separately ordered lever 6DR4004-8L. Refer to the detailed operating

instructions for further information on mounting.

3.3

Mounting the part-turn actuator

You require an actuator-specific VDI/VDE 3845 mount to install the positioner on a part-turn actuator. You receive the mount

and screws from the actuator manufacturer. Ensure that the mount has a sheet metal thickness of > 4 mm and

reinforcements. You also need the mounting kit 6DR4004-8D or the stainless steel coupling TGX: 16300-1556. Refer to the

detailed operating instructions for further information on mounting.

3.4

Using the positioner in a humid environment

Introduction
The positioner enclosure provides IP66 protection with an intended installation position. It can therefore be operated in a

moist or wet environment in the mounting positions shown below. Do not use other mounting positions since it would then be

possible for liquids, fluff, fibers or dusts to enter the device via the exhaust openings.

«
...
7
8
9
10
11
...
»

Содержание SIPART PS2 6DR5xx0 series


























































Отзывы:

Нет отзывов

Похожие инструкции для SIPART PS2 6DR5xx0 series

Бренд: halstrup-walcher Страницы: 36

Бренд: schmersal Страницы: 72

Бренд: metso automation Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды