Siemens SINAMICS G110, Руководство по эксплуатации

Страница: 55 / 92

04/2005 Using the SINAMICS G110
SINAMICS G110 Operating Instructions
6SL3298-0AA11-0BP0
55
Reversing the motor
Analog Variant
¾
Default value: 2 – Terminal 4 (DIN 1, high)
¾
Other settings: see P0701 to P0704 in the Parameter List
USS Variant
¾
Default value: 5 – Terminals 8 & 9 (RS485); control word 1 (r0054), bit 11
4.3 Types of Control using the Terminals
1
Note
The automatic restart function (P1210) is disabled in the factory default setting. If
the automatic restart function is required, the user must specifically enable this
function. For details, please see the Parameter List..
The different types of control are enabled using parameter P0727 and selecting
one of the following options:
Default value:
¾
P0727 = 0: Siemens standard control (ON/OFF1, REV)
Other settings:
¾
P0727 = 1: 2-wire control (ON_FWD, ON_REV)
¾
P0727 = 2: 3-wire control (FWDP, REVP, STOP)
¾
P0727 = 3: 3-wire control (ON_PULSE, REV, OFF1/HOLD)
When any of the control functions are selected using P0727, the settings for the
digital inputs (P0701 to P0704) are redefined as shown in Table 4-1 below.
Table 4-1 Redefined Digital Inputs
Settings
P0701 - P0704 P0727=0
(Siemens Standard
Control)
P0727=1
(2-wire Control)
P0727=2
(3-wire Control)
P0727=3
(3-wire Control)
1 ON/OFF1 ON_FWD STOP ON_PULSE
2 ON_REV/OFF1 ON_REV FWDP OFF1/HOLD
12 REV REV REVP REV
"P" denotes "Pulse; "FWD" denotes "Forward"; "REV" denotes "Reverse"
Each of the control methods shown in Table 4-1 will be explained individually.
1
Valid for firmware 1.1