Siemens SIMOTION TB30 Скачать руководство пользователя страница 18

Страница: 18 / 150

Description

1.2 System components

SIMOTION D4x5-2

Manual, 02/2012

Ethernet

The control unit can communicate with the following components via the Ethernet interfaces

or be embedded in an automation environment:

Table 1- 4

Components on the Ethernet

Component

Function

Programming device (PG/PC)

... configures, parameterizes, programs, and tests with the

"SIMOTION SCOUT" engineering system (ES)

Master computer

... communicates with other devices via UDP, TCP/IP

SIMATIC HMI device

... is used for operating and monitoring functions. This is not an

essential requirement for the operation of a control unit.

PROFINET IO

The D4x5-2 DP/PN can communicate with the following components via the onboard

PROFINET IO interface or via the Ethernet communication board (CBE30-2).

Table 1- 5

Components on the PROFINET IO

Component

Function

Programming device (PG/PC)

... configures, sets parameters, programs, and tests using the

"SIMOTION SCOUT" Engineering System (ES).

SIMATIC HMI device

... is used for operating and monitoring functions. This is not an

essential requirement for the operation of a control unit.

Other controllers (e.g.

SIMOTION or SIMATIC)

... e.g. higher-level controller (plant controller); modular machine

concepts with multiple controllers, distributed across individual

machine modules.

Master computer

... communicates with other devices via UDP, TCP/IP.

Distributed I/O systems
TMC

Multi-channel, fast and isochronous I/O for mechanical engineering

with PROFINET IO connection in a rugged SINAMICS S120

booksize compact format; direct connection of the I/O channels on

the module or separately via wiring modules.

SIMATIC ET 200M

Modular I/O system for control cabinet installation and high

channel densities.

SIMATIC ET 200S

Finely scalable I/O system for control cabinet configuration and

particularly time-critical applications; including motor starters,

safety technology and individual grouping of load groups.

SIMATIC ET 200pro

Modular I/O system with IP65/67 degree of protection for machine-

related applications with no control cabinet; with features such as

compact designs, integrated PROFIsafe safety technology,

PROFINET IO connection and live module replacement.

SIMATIC ET 200eco PN

Compact block I/O with IP65/66/67 degree of protection for

cabinet-free usage in machines with M12 connection method. Very

rugged and resistant encapsulated metal enclosure.

Содержание SIMOTION TB30























































































































































Результаты поиска

Содержание SIMOTION TB30

Отзывы:

Похожие инструкции для SIMOTION TB30

Бренды по названию

Популярные бренды

Siemens SIMOTION TB30, Руководство пользователя

Результаты поиска

Содержание SIMOTION TB30

Отзывы:

Похожие инструкции для SIMOTION TB30

Бренды по названию

Популярные бренды