Siemens SIMOTION TB30 Скачать руководство пользователя страница 12

Страница: 12 / 150

Description

1.1 System overview

SIMOTION D4x5-2

Manual, 02/2012

Application

The SIMOTION D4x5-2 is ideally suited to applications with many coordinated axes with high

clock-pulse rates.
Typical applications include:
●

Compact multiple-axis machines

●

High-performance applications with short machine cycles

●

Compact machines
–

Including the complete machine control in the drive

–

With extensive connection possibilities for communication, HMI and I/O

●

Distributed drive concepts
–

Applications with many axes

–

Synchronization of several SIMOTION D control units using distributed synchronous

operation

Versions

The control units are available in the versions SIMOTION D425-2 (BASIC performance),

SIMOTION D435-2 (STANDARD performance), SIMOTION D445-2 DP/PN (HIGH

performance) and SIMOTION D455-2 DP/PN (ULTRA-HIGH performance). The versions

differ in their PLC performance and in their motion control performance. The main

distinguishing features are:

Table 1- 1

Device versions and characteristics

SIMOTION
D425-2

SIMOTION
D435-2

SIMOTION
D445-2

SIMOTION
D455-2

Maximum number of

axes

128

Minimum

servo/interpolator cycle

clock

0.5 ms

D435-2 DP: 0.5 ms
D435-2 DP/PN:

0.5/0.25 ms

DRIVE-CLiQ interfaces

Explanation:

●

0.5 ms in connection with SINAMICS S120 (incl. SINAMICS Integrated / CX32-2)

●

0.25 ms in connection with Servo_fast and IPO_fast for fast I/O processing or

high-performance hydraulic applications. The sensors and actuators are connected

via high-speed PROFINET IO I/O modules.

The control units feature PLC and motion control performance (open-loop control and motion

control) for up to 16, 32, 64 or 128 axes, as required.
The integrated drive computing performance of the control units allows up to six servo,

six vector or twelve

V/f axes on each D4x5-2 control unit (drive control based on CU320-2,

firmware version ≥ V4.x).

Содержание SIMOTION TB30























































































































































Результаты поиска

Содержание SIMOTION TB30

Отзывы:

Похожие инструкции для SIMOTION TB30

Бренды по названию

Популярные бренды

Siemens SIMOTION TB30, Руководство пользователя

Результаты поиска

Содержание SIMOTION TB30

Отзывы:

Похожие инструкции для SIMOTION TB30

Бренды по названию

Популярные бренды