manualshive.com logo in svg

Siemens SIMOTION P320-4 E, Руководство пользователя

Поделиться
Скачать
Siemens SIMOTION P320-4 E Скачать руководство пользователя страница 111

6.4

Overview of operating modes for the SIMOTION P320-4

Overview

The following operating modes are available for mounting the SIMOTION P320-4. 

The operating modes are:
● Decentralized structure 

The SIMOTION P320-4 is mounted separately from a panel in a decentralized structure.

● Headless operation 

The SIMOTION P320-4 is operated without panel.

Before mounting, the following must be noted:

Before you mount the SIMOTION P320-4 in a control cabinet or a rack, optional components 

are installed to expand the SIMOTION P320-4.

Example: installation of the optional IsoPROFIBUS board.
To do this, open the device and note the following procedure:
1. Open the cover of the SIMOTION P320-4.
2. Insert the optional IsoPROFIBUS board.
3. Plug in the SYNC I/O cable for synchronizing with PROFINET.
4. Close the cover.
5. Mount the SIMOTION P320-4.  

Note
The installation and removal of components as well as the mounting of the SIMOTION P320-4 

are described in detail in the SIMOTION P320-4 E / P320-4 S Commissioning and Hardware 

Installation Manual.

NOTICE
Avoid loss of warranty
If you install or exchange system expansions and damage your device, the warranty becomes 

void. 

Installation/mounting

6.4 Overview of operating modes for the SIMOTION P320-4

SIMOTION P320-4 E / P320-4 S

Manual, 03/2018, A5E36004933B

111

Содержание SIMOTION P320-4 E







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды