Siemens Simotics SD 1LE7, Руководство по эксплуатации

Страница: 10 / 44

1LE7
8
A5E36065207, 04/2018
● When using 2-cable lifting equipment, ensure that the maximum angle of inclination is ≤ 45° according to ISO 3266 (DIN
580).
● Align the eyebolts so that the cables used for lifting are aligned with the planes of the eyebolts.
Toppling over or slipping of the motor
The motor can slide or topple over if it is not correctly lifted or transported. This can result in death, serious injury, or material
damage.
● Use all the lifting eyes on the machine.
● When using the lifting eyes on the machine, do not attach any additional loads or weight. The lifting eyes are only
designed for the weight of the machine itself.
● Any eyes that are screwed in must be tightly fastened.
● Eyebolts must be screwed in right up to their supporting surface.
● Comply with the permissible eyebolt loads.
● When necessary, use suitably dimensioned lifting equipment, for example hoisting straps (EN1492-1) and load restraints
(EN12195-2).
Note
When lifting the machines for transport, only lift them in a position that corresponds to their basic construction type.
The type of construction of the machine is stated on the rating plate.
If any transport locks are in place, remove them before commissioning. Store the transport locks or disable them. Use the
transport locks when transporting the motors again or reactivate the transport locks.
The machines are packed in different ways depending on how they are transported and their size. If not otherwise
contractually agreed, the packaging corresponds to the packing guidelines according to ISPM (International Standards for
Phytosanitary Measures).
Comply with the images shown on the packaging. Their meaning is as follows:
Up Fragile
goods
Protect
against mois-
ture
Protect
against heat
Center of
gravity
Hand hooks
forbidden
Attach
here
4.4.3 Storage
Storing outdoors
NOTICE
Damage to the motor
Damage can occur if incorrectly stored.
Take all precautions to protect the motor under extreme climatic conditions, e.g. salt-laden and/or dusty, moist/humid
atmospheres.
Choose a dry storage location which is safe from flooding and free from vibration. Repair any damage to the packaging
before putting the equipment into storage if this is necessary to ensure proper storage conditions. In order to ensure
protection against ground moisture, locate machines, equipment and crates on pallets, wooden beams or foundations.
Prevent equipment from sinking into the ground. Do not impede air circulation under the stored items.
Covers or tarpaulins used to protect the equipment against the weather must not come into contact with the surfaces of the
equipment. Use wooden spacer elements to ensure that air can circulate freely around the equipment.