Siemens Simotics SD 1LE7, Руководство по эксплуатации

Страница: 4 / 44

1LE7
2
A5E36065207, 04/2018
4. Ground and short-circuit.
5. Provide protection against adjacent live parts.
To energize the system, apply the measures in reverse order.
2.3 Qualified personnel
All work at the machine must be carried out by qualified personnel only. For the purpose of this documentation, qualified
personnel is taken to mean people who fulfill the following requirements:
● Through appropriate training and experience, they are able to recognize and avoid risks and potential dangers in their
particular field of activity.
● They have been instructed to carry out work on the machine by the appropriate person responsible.
2.4 Safe handling
Workplace safety depends on the attentiveness, care, and common sense of the personnel who install, operate, and
maintain the machine. In addition to the safety measures cited, as a matter of principle, the use of caution is necessary when
you are near the machine. Always pay attention to your safety.
Also observe the following to prevent accidents:
● General safety regulations applicable in the country where the machine is deployed.
● Manufacturer-specific and application-specific regulations
● Special agreements made with the operator
● Separate safety instructions supplied with the machine
● Safety symbols and instructions on the machine and its packaging
WARNING
Live parts
Electric machines contain live parts.
Fatal or severe injuries and substantial material damage can occur if the covers are removed or if the machine
is not handled, operated, or maintained properly.
•
Always observe the “five safety rules" (Page 1) when carrying out any work on the machine.
•
Only remove covers in the manner described in the operating instructions.
•
Operate the machine properly.
• Regularly and professionally maintain the machine according to the instructions provided in the
"Maintenance" (Page 27) chapter of the operating instructions.
WARNING
Rotating parts
Electric machines contain dangerous rotating parts.
Fatal or severe injuries and substantial material damage can occur if the covers are removed or if the machine is not
handled, operated, or maintained properly.
• Only remove the covers using the methods described by these operating instructions.
•
Operate the machine properly.
•
Regularly and correctly maintain the machine.
• Secure free shaft extensions and other rotating part such as couplings and pulley belts so that they cannot be touched.
WARNING
Hot surfaces
Electric machines have hot surfaces. Touching hot surfaces can result in severe burns.
•
Allow the machine to cool before starting work on the machine.
•
Only remove the covers using the methods described by these operating instructions.
• Operate the machine properly.