Siemens Simotics SD 1LE7, Руководство по эксплуатации

Страница: 3 / 44

© Siemens AG 2016 - 2018. All rights reserved
A5E36065207, 04/2018
1
Low-voltage motors
SIMOTICS SD
1LE7
Compact Operating Instructions
1 Introduction
These instructions describe the machine and explain how to handle it, from initial delivery to final disposal of the equipment.
Keep these instructions for later use.
Read these operating instructions before you handle the machine and follow the instructions to become familiar with its
design and operating principles and thus ensure safe, problem-free machine operation and long service life.
Please contact the service center if you have any suggestions on how to improve this document.
2 Safety notes
2.1 Information for those responsible for the plant or system
This electric machine has been designed and built in accordance with the specifications contained in Directive IS 12615, and
is intended for use in industrial plants and systems. Please observe the country-specific regulations when using the electric
machine outside India. Follow the local and industry-specific safety and setup regulations.
The persons responsible for the plant must ensure the following:
● Planning and configuration work and all work carried out on and with the machine is only to be done by qualified
personnel.
● The operating instructions must always be available for all work.
● The technical data as well as the specifications relating to the permissible installation, connection, ambient and operating
conditions are taken into account at all times.
● The specific setup and safety regulations as well as regulations on the use of personal protective equipment are
observed.
Note
Use the services and support provided by the appropriate service center (Page 38) for planning, installation,
commissioning and service work.
You will find safety instructions in the individual sections of this document. Follow the safety instructions for your own safety,
to protect other people and to avoid damage to property.
Observe the following safety instructions for all activities on and with the machine.
2.2 The 5 safety rules
For your own personal safety and to prevent material damage when carrying out any work, always observe the safety-
relevant instructions and the following five safety rules according to EN 50110-1 "Working in a voltage-free state". Apply the
five safety rules in the sequence stated before starting work.
5 safety rules
1.
Disconnect the system.
Also disconnect the auxiliary circuits, for example, anti-condensation heating.
2. Secure against reconnection.
3. Verify absence of operating voltage.