Siemens SIMOTICS M-1PH818 Скачать руководство пользователя страница 54

Страница: 54 / 314

5.2.3

Removing anti-corrosion protection

Machined, bare metallic surfaces of the motor, such as the shaft end, fitted key, foot and flange

surfaces, are treated with an anti-corrosion agent.
1. Remove this layer of anti-corrosion agent from the mounting surfaces of the motor by wiping

it away with an absorbent cloth or paper sheet.

NOTICE
Damage to the machine surface
Using metal objects such as scrapers, spatulas, or plates to remove the anti-corrosion

protection could result in damage to the surfaces of the machine parts.

2. Then lightly oil the bare surfaces again.

5.2.4

Mounting the output elements

Balance quality

The rotor is dynamically balanced. For shaft extensions with featherkeys, the balancing type

is specified using the following coding on the face of the drive end of the shaft:

Balancing with half a feather key

Balancing with a full feather key

Balancing with a plain shaft - no keyway

Figure 5-1

Balancing type on the drive-end side

Mounting
5.2 Lift the machine to where it will be mounted and position it

SIMOTICS M-1PH8 1PH818., 1PH822., 1PH828.

Operating Instructions 10/2017

Содержание SIMOTICS M-1PH818



























































































































































































































































































































Результаты поиска

Содержание SIMOTICS M-1PH818

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIMOTICS M-1PH818, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание SIMOTICS M-1PH818

Отзывы:

Бренды по названию

Популярные бренды