manualshive.com logo in svg

Siemens SIMOTICS M-1PH818, Инструкции по эксплуатации и монтажу

Этот продукт - Siemens SIMOTICS M-1PH818, поставляется с инструкциями по эксплуатации и установке, которые можно бесплатно скачать с {веб-сайт}. Подробное руководство поможет вам правильно использовать этот продукт и извлечь максимальную выгоду из его функций и возможностей.

Поделиться
Скачать
background image

Operating instructions

K3G250-RR03-H4

Siemens AG PD LD Nbg.

Translation of the original operating instructions

WARNING
Live terminals and connections even with device
switched off

Electric shock
→ Wait five minutes after disconnecting the voltage at all poles

before opening the device.

CAUTION
In the event of a fault, the rotor and the impeller will be
energized

The rotor and the impeller have basic insulation.
→ Do not touch the rotor and impeller once installed.

CAUTION
If control voltage or a stored speed set value is applied,
the motor will restart automatically, e.g. after a power
failure.

Risk of injury
→ Keep out of the device’s danger zone.# When working on

the device, switch off the line voltage and ensure that it
cannot be switched back on.

→ Wait until the device comes to a stop.
→ After working on the device, remove any tools or other

objects from the device.

1.5 Safety and protective features

DANGER
Protective device missing and protective device not
functioning

Without a protective device there is a risk of serious injury, for
instance when reaching into the device during operation.
→ Operate the device only with a fixed protective device and

guard grille.

→ The fixed protective device must be able to withstand the

kinetic energy of a fan blade that becomes detached at
maximum speed. There must not be any gaps which it is
possible to reach into with the fingers, for example.

→ The device is a built-in component. As the operator, you

are responsible for ensuring that the device is secured
adequately.

→ Stop the device immediately if you notice a missing or

ineffective protective device.

1.6 Electromagnetic radiation

Interference from electromagnetic radiation is possible, e.g. in conjunction
with open- and closed-loop control devices.
If impermissible radiation levels occur following installation, appropriate
shielding measures have to be taken by the user.

NOTE
Electrical or electromagnetic interference after installing
the device in customer equipment.

→ Verify that the entire setup is EMC-compliant.

1.7 Mechanical movement

DANGER
Rotating device

Risk of injury to body parts coming into contact with the rotor or
the impeller.
→ Secure the device against accidental contact.
→ Before working on the system/machine, wait until all

parts have come to a standstill.

WARNING
Rotating device

Long hair and dangling items of clothing, jewelry and the like
can become entangled and be pulled into the device. Injuries
can result.
→ Do not wear any loose-fitting or dangling clothing or jewelry

while working on rotating parts.

→ Protect long hair with a cap.

1.8 Emissions

WARNING
Depending on the installation and operating conditions,
the sound pressure level may exceed 70 dB(A).

Risk of noise-induced hearing loss
→ Take appropriate technical safety measures.
→ Protect operating personnel with appropriate safety

equipment such as hearing protection.

→ Also observe the requirements of local agencies.

1.9 Hot surface

CAUTION
High temperature on electronics housing

Risk of burns
→ Ensure sufficient protection against accidental contact.

1.10 Transport

NOTE
Transporting the device

→ Transport the device in its original packaging only.
→ Secure the device so it cannot slip, e.g. by using a

lashing strip.

1.11 Storage

;

Store the device, partially or fully assembled, in a dry place,
protected against the weather and free from vibration, in the original
packaging in a clean environment.

;

Protect the device against environmental effects and dirt until final
installation.

;

We recommend storing the device for no longer than one year in
order to guarantee trouble-free operation and the longest possible
service life.

;

Even devices explicitly intended for outdoor use are to be stored as
described prior to commissioning.

;

Maintain the storage temperature, see
Chapter 3.6 Transport and storage conditions.

;

Make sure that all cable glands are fitted with dummy plugs.

Item no. 55700-5-9970 · ENU · Change 94781 · Approved 2017-09-12 · Page 2 / 12

ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com

196

Содержание SIMOTICS M-1PH818



























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMOTICS M-1PH818

Danfoss VLT AutomationDrive FC 300 Series Selection Manual preview
VLT AutomationDrive FC 300 Series
Бренд: Danfoss Страницы: 56
Danfoss 51 Series Service Kit Instructions preview
51 Series
Бренд: Danfoss Страницы: 2
Leroy-Somer Compabloc 3000 Installation Manual preview
Compabloc 3000
Бренд: Leroy-Somer Страницы: 8
SAS RIO Bravo IP Engine User Manual-Preliminary preview
RIO Bravo IP Engine
Бренд: SAS Страницы: 19
Key Automation INT Instructions And Warnings For Installation And Use preview
INT
Бренд: Key Automation Страницы: 50
JetCat P100-RX Manual preview
P100-RX
Бренд: JetCat Страницы: 54
Quectel M10 At Command Set preview
M10
Бренд: Quectel Страницы: 165
SunStar Fortuna series User Manual preview
Fortuna series
Бренд: SunStar Страницы: 86
O.S. engine OCA-3100HV Instructions preview
OCA-3100HV
Бренд: O.S. engine Страницы: 2
Yanmar 4BY2 Service Manual preview
4BY2
Бренд: Yanmar Страницы: 248
Lister Petter L Series Operator'S Handbook Manual preview
L Series
Бренд: Lister Petter Страницы: 24
DANA 4360-48 Parts List preview
4360-48
Бренд: DANA Страницы: 3
DANA 4360-37 Parts List preview
4360-37
Бренд: DANA Страницы: 3
DANA 4360-61 Parts List preview
4360-61
Бренд: DANA Страницы: 3
Iveco N45 MNA M10 Installation Directive Manual preview
N45 MNA M10
Бренд: Iveco Страницы: 74
CERTIFIED 212cc Instruction Manual preview
212cc
Бренд: CERTIFIED Страницы: 17
Jabiru 2200 Installation Manual preview
2200
Бренд: Jabiru Страницы: 49
Marine Power 4.3 VORTEC MPI Owner'S Manual preview
4.3 VORTEC MPI
Бренд: Marine Power Страницы: 56

Бренды по названию

Популярные бренды

Загрузить еще бренды