manualshive.com logo in svg

Siemens SIMOTICS M-1PH818, Инструкции по эксплуатации и монтажу

Этот продукт - Siemens SIMOTICS M-1PH818, поставляется с инструкциями по эксплуатации и установке, которые можно бесплатно скачать с {веб-сайт}. Подробное руководство поможет вам правильно использовать этот продукт и извлечь максимальную выгоду из его функций и возможностей.

Поделиться
Скачать
background image

Operating instructions

K3G280-RR03-H4

Siemens AG PD LD Nbg.

Translation of the original operating instructions

With regard to cyclic speed loads, note that the rotating parts of
the device are designed for a maximum of one million load
cycles. If you have special questions, consult ebm-papst for
support.

;

Use the device in accordance with its degree of protection.

Information on surface quality

The surfaces of the products conform to the generally applicable industrial
standard. The surface quality may change during the production period.
This has no effect on strength, dimensional stability and dimensional
accuracy.
The color pigments in the paints used perceptibly react to UV light over
the course of time. This does not however in any way affect the
technical properties of the products. The product is to be protected against
UV radiation to prevent the formation of patches and fading. Changes in
color are not a reason for complaint and are not covered by the warranty.

3.5 Mounting data

Strength class of
screws

8.8

;

Secure the screws against unintentional loosening (e.g. use self-
locking screws).

Any further mounting data required can be taken from the product
drawing or Section Chapter 4.1 Mechanical connection.

3.6 Transport and storage conditions

Max. permitted
ambient temp. for
motor (transport/
storage)

+80 °C

Min. permitted
ambient temp. for
motor (transport/
storage)

-40 °C

3.7 Electromagnetic compatibility

EMC immunity to
interference

According to EN 61000-6-2 (industrial
environment)

EMC circuit feedback

According to EN 61000-3-2/3

EMC interference
emission

According to EN 61000-6-3 (household
environment)

4. CONNECTION AND STARTUP

4.1 Mechanical connection

CAUTION
Risk of cutting and crushing when removing device
from packaging

→ Carefully remove the device from the packaging by grasping

hold of the frame. Never subject to any impact.

→ Wear safety shoes and cut-resistant safety gloves.

CAUTION
Heavy load when unpacking device

Risk of physical injury, such as back injuries.
→ Two people should work together to remove the device from

its packaging.

NOTE
Damage to the device from vibration

Bearing damage, shorter service life
→ The fan must not be subjected to force or excessive vibration

from sections of the installation. #If the fan is connected to air
ducts, the connection should be isolated from vibration, e.g.
using compensators or similar elements. #Ensure stress-free
attachment of the fan to the substructure.

;

The fan may not be handled in the area around the inlet nozzle during
transport and installation.
There is a risk of damage to the impeller.

;

Check the device for transport damage. Damaged devices are not to
be installed.

;

Install the undamaged device in accordance with your application.

CAUTION
Possible damage to the device

If the device slips during installation, serious damage can result.
→ Ensure that the device is securely positioned at its place of

installation until all fastening screws have been tightened.

●

The fan must not be strained on fastening.

4.2 Electrical connection

DANGER
Voltage on the device

Electric shock
→ Always connect a protective earth first.
→ Check the protective earth.

DANGER
Faulty insulation

Risk of fatal injury from electric shock
→ Use only cables that meet the specified installation

regulations for voltage, current, insulation material, capacity,
etc.

→ Route cables so that they cannot be touched by any

rotating parts.

Item no. 55768-5-9970 · ENU · Change 94605 · Approved 2017-09-29 · Page 6 / 12

ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com

214

Содержание SIMOTICS M-1PH818



























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMOTICS M-1PH818

BONFIGLIOLI BE 100 Installation, Operation And Maintenance Manual preview
BE 100
Бренд: BONFIGLIOLI Страницы: 36
Idex MICROPUMP DEELE Installation, Operation And Warranty Information preview
MICROPUMP DEELE
Бренд: Idex Страницы: 23
Doosan D35S-5 Operation & Maintenance Manual preview
D35S-5
Бренд: Doosan Страницы: 350
SCHABMULLER TSA 200-100-220 Operating And Maintenance Instructions Manual preview
TSA 200-100-220
Бренд: SCHABMULLER Страницы: 56
VDG TM100B25 Installation Manual preview
TM100B25
Бренд: VDG Страницы: 18
MTU 10V2000Mx4 Operating Instructions Manual preview
10V2000Mx4
Бренд: MTU Страницы: 156
Chicago Electric 07570 Assembly And Operating Instructions Manual preview
07570
Бренд: Chicago Electric Страницы: 8
Yanmar 1GM10 Operation Manual preview
1GM10
Бренд: Yanmar Страницы: 94
ARO 50 SERIES Operator'S Manual preview
50 SERIES
Бренд: ARO Страницы: 8
DANA 4360-51 Parts List preview
4360-51
Бренд: DANA Страницы: 3
WilTec 99200 Operation Manual preview
99200
Бренд: WilTec Страницы: 16
WilTec 92454 Operation Manual preview
92454
Бренд: WilTec Страницы: 26
LRP electronic 32121 User Manual preview
32121
Бренд: LRP electronic Страницы: 11
Mitsubishi Heavy Industries S3L Service Manual preview
S3L
Бренд: Mitsubishi Heavy Industries Страницы: 200
LinMot 0150-2707 Installation Manual preview
0150-2707
Бренд: LinMot Страницы: 48
3W 200i B2 TS Manual preview
200i B2 TS
Бренд: 3W Страницы: 17
Fastech Ezi-Step BT-42 Series Operating Manual preview
Ezi-Step BT-42 Series
Бренд: Fastech Страницы: 28
CAME AXL Series Installation, Operation And Maintenance Manual preview
AXL Series
Бренд: CAME Страницы: 64

Бренды по названию

Популярные бренды

Загрузить еще бренды