Siemens SIMOTICS CONNECT 600, Руководство по эксплуатации

Страница: 10 / 80

2.3 The 5 safety rules
To ensure your own personal safety as well as to avoid material damage, always comply with the
safety-relevant instructions when carrying out any work. Also carefully comply with the 5 safety
rules according to EN 50110‑1 "Working in a no-voltage state" in the specified sequence.
5 safety rules
1. Disconnect the system.
Also disconnect the auxiliary circuits, for example, anti-condensation heating.
2. Secure against reconnection.
3. Verify absence of operating voltage.
4. Ground and short-circuit.
5. Provide protection against adjacent live parts.
To energize the system, apply the measures in reverse order.
2.4 Electrostatic sensitive devices
Material damage due to electrostatic discharge
Electronic modules contain components that can be destroyed by electrostatic discharge. These
components can be damaged or destroyed if they are not handled correctly. To protect
equipment against damage, follow the instructions given below.
• Only touch electronic modules if you absolutely have to work on them.
• The body of the person concerned must have been electrostatically discharged and
grounded immediately before any electronic modules are touched.
• Electronic modules should not be brought into contact with electrically insulating materials,
such as:
– Plastic film
– Plastic parts
– Insulating table supports
– Clothing made of synthetic fibers
• Always place electrostatic sensitive devices on conductive bases.
• Always pack, store and transport electronic modules or components in conductive
packaging, such as:
– Metallized plastic or metal containers
– Conductive foam material
– Domestic aluminum foil
Safety instructions
2.4 Electrostatic sensitive devices
8
Operating Instructions, 06/2020