Siemens SIMATIC MV420 Скачать руководство пользователя страница 55

Страница: 55 / 424

Image processing

4.2 Code verification

SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06

4.2.4.3

ISO/IEC 15415

This standard is a specification for testing the print quality of barcodes for two-dimensional

symbols.
The ISO/IEC 16022:2006 document relates to this standard in the guidelines for print quality.

Quality parameters

●

Axial non-uniformity:
Difference between the height and width relative to the rows and columns.

●

Fixed pattern damage:
Measure of the errors in the borders of the data matrix and all errors in the quiet zone

around the code necessary for decoding.

●

Grid non-uniformity:
This is the deviation of the measured grid relative to the ideal grid starting from the four

corners of a data matrix.

●

Modulation:
Measurement of the uniformity of the reflectance of the dark and light cells of the data

matrix.

●

Print growth:
Positive or negative size ratio of the printed cells relative to the ideal grid. Is only

calculated as a reference, no quality grade is assigned.

●

Reference decode:
A measurement of the data matrix with the result passed/failed. The measurement is

based on a binary image of the code to ISO/IEC 16022:2006.

●

Symbol contrast:
Difference between the highest and lowest reflectance of the data matrix surface.

●

Unused error correction:
Proportion of error correction information not used for correction of the read result.

Содержание SIMATIC MV420









































































































































































































































































































































































































































Результаты поиска

Содержание SIMATIC MV420

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIMATIC MV420, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC MV420

Отзывы:

Бренды по названию

Популярные бренды