manualshive.com logo in svg

Siemens SIMATIC MV420, Руководство по эксплуатации

Поделиться
Скачать
Siemens SIMATIC MV420 Скачать руководство пользователя страница 165

 

Operator control and monitoring 

 

9.2 Working with the user interface 

SIMATIC MV420 / SIMATIC MV440 
Operating Instructions, 04/2013, A5E02371045-06 

163

 

Controlling the reader via an automation system  

If the reader is controlled via an automation system, i.e. with the DISA bit set, you will need 

to log on to the reader as follows: 
1.

 

Make sure that only one PC is accessing the reader (padlock with red/gray markers). 

2.

 

Place the mouse pointer on the currently logged-on user (top right) and click. This brings 

you to the "Security" tab on the "Options" page. 

3.

 

To control the reader, log on as "User1" or "Service" user. This is only possible if the 

"Take control" check box is selected for the relevant user. 
Remember that, by logging on, you intervene in reader control by the automation system. 
This is only relevant for functions that require the DISA bit, for example program changes 

and saving programs. 

Status display 

 

Figure 9-3 

Status display (SIMATIC MV440) 

The reader and its three status LED displays appear below the task buttons. The status 

LEDs indicate the current status of the reader. 

 

LED designation 

Meaning 

POWER  

GREEN, permanently on 
The reader must be switched on before it can be accessed via the user 

interface. This LED therefore lights up a constant green. 

ETHERNET  

Permanently off 
The reader is not connected to the Ethernet. Either the reader is off or the 

Ethernet cable has been disconnected. 
Flashing YELLOW 
There is an active connection to the user interface. 

STATE/SF  

Permanently off 
The reader is in "Stop" mode, i.e. there are no errors 
GREEN, permanently on 
The reader is in RUN mode, i.e., there are no errors 
RED, permanently on 
The reader is in "Group error" mode. 

 

Содержание SIMATIC MV420









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды