Siemens SIMATIC Mobile Client900RFN, Руководство по эксплуатации

Страница: 71 / 164

Parameter assignment of a Mobile Client
4.6 General settings
Mobile Client900RXA
Operating Instructions, 07/2015, A5E36360099-AA
71
4.6.7 Backing up registry information and temporary data
You can install and uninstall your own software on and from the HMI device. You need to
back up the registry settings to flash memory after installation or removal.
You can also save the data in the memory buffer to flash memory.
Requirement
You have opened the "Persistent Storage" tab in the "OP Properties" dialog with the
"OP" icon.
①
Button for saving registry information
②
Button for saving temporary files
③
Automatically repairs file system errors on plug-in storage media during HMI device startup
and when a storage medium is inserted.
Procedure
1. To save the registry entries, click "Save registry".
The current registry entries are backed up to the flash memory. The HMI device loads the
saved registry information the next time it boots.
2. To save the files, click "Save files".
All files in the memory buffer are saved. The storage medium is the flash memory. You
can access the files saved under "Start > Documents". These files are written back when
the HMI device is started. The "\Temp" directory is not saved.
3. If you want the file system errors on the memory card to be repaired automatically, select
the "Automatically repair file ..." check box.
If the check box is cleared, the file system will only be repaired after prompting.
4. Confirm your entries.
The dialog closes.
At the next startup, the HMI device will use the registry entries and temporary files set.