Siemens SIMATIC IPC547J Скачать руководство пользователя страница 73

Страница: 73 / 198

Commissioning the device

4.3 Switching off the device

Operating Instructions, 01/2021, A5E43920357-AA

Hardware reset

If the device does not respond to input from the keyboard or mouse, restart it with the

hardware reset. A started operating system will not hereby shut down safely.

NOTICE
Data loss

With a hardware reset, the device is switched off and restarted.
•

Data in the main memory is deleted.

•

Data on the data storage media may be lost.

•

The device may be damaged.

Perform a hardware reset only in the case of an emergency.

Hardware reset with on-off button:

•

Press the on/off button for more than 4 seconds.

–

The unit switches off.

–

To switch the device on again, press the on/off button again.

Hardware reset with reset button:

•

Press the reset button.

–

The device switches off and on again.

Information on the position of the buttons is available under "Operator controls (Page 28)".

Содержание SIMATIC IPC547J







































































































































































































Результаты поиска

Содержание SIMATIC IPC547J

Отзывы:

Похожие инструкции для SIMATIC IPC547J

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC547J, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC547J

Отзывы:

Похожие инструкции для SIMATIC IPC547J

Бренды по названию

Популярные бренды