Cleaning the device
4.4 Handling of stainless steel surfaces
Comfort Panels INOX, ITC INOX
Compact Operating Instructions, 08/2022, A5E33472156-AP
25
Cleaning guidelines
Further information on stainless steel surfaces:
•
The surface should be properly ventilated.
•
Keep the surface clean. Immediately remove any product residues and cleaning agents.
Always avoid the return unwanted residues to the production process.
•
If mechanical cleaning is necessary, do not use cleaning equipment made of metal.
–
Clean with a soft cloth.
–
Use plenty of water to clean the surface.
–
Make sure that the cleansing agent is completely removed without any residue.
•
Make sure surface is not damaged: Do not damage the device during operation, or by
cleaning or repairing it using hard tools, in particular tools made of corrodible materials.
•
Make sure that the surface does not come into contact with rusted parts.
This includes water pipes, filings, residue from wire brushes or steel wool. These, as well
as rust films have a corrosive effect on parts made of stainless steel.
–
Remove any stains or rust immediately.
–
Remove new rust spots with a mild abrasive detergent in order to prevent any further
corrosion.
–
Rinse the part thoroughly after you cleaned it.
