Installing and connecting the device
3.3 Inserting the mounting seal
Comfort Panels INOX, ITC INOX
18
Compact Operating Instructions, 08/2022, A5E33472156-AP
2.
Carefully place the device on the front of the device (interfaces point to you).
3.
Insert the mounting seal into the stainless steel front as shown. Also note points
④
-
⑥
.
④
Seal corner is underneath the housing frame.
⑤
The positioning hook of the seal fully engages into the cut-out, flat without protrusion.
⑥
The coding key lies flat in the intended cut-out.
4.
Check the correct fit of the mounting seal:
–
The coding tap is placed at the specified location.
–
All positioning hooks rest flush in their cutouts. The mounting seal is installed correctly
when it lies flat on the entire stainless steel front. This must not lead to distortions and
protrusions.
If necessary, correct the seat: To do this, press the mounting seal into the recess.
–
The edge of the mounting seal is flush with the edge of the stainless steel front all
around.
