Technical specifications
5.5 Technical specifications
Comfort Panels INOX, ITC INOX
42
Compact Operating Instructions, 08/2022, A5E33472156-AP
Material
Component
Material
Front frame
Stainless steel, material number 1.4301, V2A
Front membrane
Polyester-based
Mounting gasket
EPDM, 70 Shore A, black
Protection class and degree of protection
Characteristic
Standard
Classification
Protection class
EN 61131-2
Protection class III
Degree of protection, on the
front, for operation at normal
atmospheric conditions
EN 60529:1991 + A1:2000
and
DIN 40050-9
IP66K
Degree of protection, on the
front, for operation in
hazardous areas of
Zones 2 and 22
See section "Certificates and
approvals (Page 26)",
"ATEX/IECEx approval"
paragraph.
IP65
Degree of protection, rear
EN 60529
IP20
Enclosure Type, Front face only UL50
TP700 Comfort INOX,
TP1200 Comfort INOX,
TP1200 Comfort INOX LF,
TP1900 Comfort INOX, ITC1900 INOX:
Type 4X (indoor use only)
TP900 Comfort INOX,
TP1500 Comfort INOX,
Type 4X/Type 12 (indoor use only)
Note that the information on "enclosure type" is only guaranteed if the mounting cutout
conforms to the following:
•
The device has been installed according to the information provided in this document.
•
Material thickness at the mounting cutout:
–
With 7, 9, and 12" devices: 1.5 mm to 6 mm
–
With 15" and 19" devices: 1.5 mm to 5 mm
•
Permitted deviation from plane at the mounting cutout:
≤
0.5 mm
This condition must be fulfilled even for the mounted device.
•
Permitted surface roughness in the area of the mounting gasket:
≤
120 µm, corresponds
to Rz 120
