Siemens SIMATIC Box PC 627, Руководство по эксплуатации

Страница: 88 / 200

Maintenance and service
11.1 Removing and installing hardware components
SIMATIC Box PC 627
11-16
Operating Instructions, Release 05/2006, A5E00362052-03
Installing the processor
How to install the processor
1 Inserting the processor
Notice
When you insert the processor, make sure the notches of the processor and of the socket
match up.
2 Close the processor latch
3 Apply some heat-conductive paste to the processor
Caution
The processor may overheat when the system is in operation!
The heat-conductive paste must be applied evenly as a thin film!
4 Fasten the processor heat sink with the 4 screws.
To do so, insert the screws diagonally and tighten them evenly, working diagonally in order to
avoid tilting of the fan unit.
Tighten the screws down to the mechanical stop.
Required tools
You need a Torx 20 screw driver for removing the processor.