Siemens SIMATIC Box PC 627, Руководство по эксплуатации

Страница: 42 / 200

Commissioning
7.3 Windows XP Security Center
SIMATIC Box PC 627
7-2
Operating Instructions, Release 05/2006, A5E00362052-03
After you have entered all necessary information, and after the operating system
setup is completed, the PC is automatically restarted and displays the user interface of the
relevant operating system.
From now on, after you switch on the PC, the user interface of the operating system is
automatically opened when the startup routine is completed.
7.3
7.3
Windows XP Security Center
Warning from the Windows Security Center
A warning from the Windows Security Center appears the first time you switch on your
device. The Security Center checks the status of the device in regard to the three important
security aspects listed below. If a problem is detected (an outdated antivirus program, for
example), the Security Center issues a warning and makes recommendations on how you
can better protect the device.
• Firewall: The Windows Firewall adds protection to the device by blocking network or
Internet access to the device by unauthorized users. Windows checks if the device is
protected by a software firewall.
The firewall is enabled by default in the factory state.
• Antivirus software: Antivirus programs add protection to the device by searching for and
eliminating viruses and other security threats. Windows checks if a full-range, up-to-date
antivirus program is running on the device.
No antivirus software is installed in the factory state.
• Automatic updates: Using the Automatic Update feature allows Windows to regularly
search for the latest critical updates for the device and to install them automatically.
This feature is disabled in the factory state.
Configure the Security Center according to your requirements.
7.4
7.4
Switching off the device
Switching off the device
Note
On a Windows platform, you should always shut down the PC by selecting the command
Start > Shut Down.
Set the ON / Off switch to 0 position (off.) Disconnect the mains connector to isolate the
device from mains.