Siemens SIMATIC Box PC 627, Руководство по эксплуатации

Страница: 134 / 200

Detailed descriptions
16.1 Motherboard
SIMATIC Box PC 627
16-16
Operating Instructions, Release 05/2006, A5E00362052-03
Pin assignment of the equipment fan, X128
Pin No. Abbreviation Meaning Input /Output
1 GND Ground -
2 +12 V Switched power supply Output
3 CPU FAN_CLK Clock signal Input
Pin assignment of the supply for the power supply fan, X129
Pin No. Abbreviation Meaning Input /Output
1 GND Ground -
2 +12 V Switched power supply Output
3 PG1 FAN_CLK Clock signal Input
Connection for backup battery, X24 (BATT)
A battery for buffering the CMOS RAM is connected to this connector. This is a 3 V Lithium
battery with a capacity of 750 mAh.
Pin No. Abbreviation Meaning Input /Output
1 + Plus pole Input
2 - Minus pole -
Tap of the backup battery, X240 (OUT)
This connection is intended for expansion modules with on-board CMOS-RAM. The voltage
of the backup battery can be tapped here to backup the CMOS RAM data of the expansion
module.
Pin No. Abbreviation Meaning Input /Output
1 + Plus pole Output
2 - Minus pole -
Notice
No battery should be connected to this connection.
Pin assignment of the supply for the serial ATA drives X25, X26, X602
Pin No. Abbreviation Meaning Input /Output
1 +12 V Power supply Output
2 GND Ground –
3 GND Ground –
4 +5 V Power supply Output
5 +3.3 V Power supply Output