Operating the Controller - CPU 41x-2 PCI
Windows Automation Center, WinAC Slot Version 4.0
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
75
4.11
Update Firmware
The
File > Update Firmware
menu command allows you to load updated firmware
to the CPU 41x-2 PCI without a memory card. To do this, proceed as follows:
1. You can either download the files with the firmware update from the internet or
copy the files from an update CD to your PC.
The firmware consists of three files with the extension *.upd.
2. On the controller panel, select the
File > Update Firmware
menu command. A
dialog box, which informs you about further steps to take, is displayed.
3. In this dialog box, select the cpu_hd.upd file.
4. Click
OK.
The firmware will be updated automatically. A progress bar informs you about the
progress of the update. At the conclusion of the update, a new dialog is displayed
indicating whether or not the update was successful. In addition, the new version of
the firmware is displayed.
