manualshive.com logo in svg

Siemens SICAM Q100, Руководство по эксплуатации устройства, Страница: 306 / 376

Поделиться
Скачать
Siemens SICAM Q100 Скачать руководство пользователя страница 306

11 Maintenance, Storage, Transport

11.1 Maintenance

306

SICAM Q100, 7KG95xx, Device Manual

E50417-H1040-C522-A4, Edition 03.2018

11.1

Maintenance

Except for a battery replacement, the SICAM Q100 is maintenance-free.

Wipe the device using a clean, dry and soft cloth if necessary. Do not use solvents.

The battery change is described in chapter 6.1.

11.2

Storage

Store the device in a dry and clean location. Store the device within a temperature range from -40 °C to +70 °C 
(-40 °F to +158 °F). 

The relative humidity must not lead to condensation or ice formation. 

To avoid premature aging of the electrolytic capacitors, store the device within the recommended temperature 
range of +10 °C to +35 °C (+50 °F to +95 °F). 

Siemens furthermore recommends connecting the device to supply voltage once a year for 1 to 2 days in order 
to form the inserted electrolytic capacitors. This procedure should also be carried out before operating the de-
vice.

The Lithium batteries used in Siemens devices are subject to Special Provision 188 of the UN Recommenda-
tions on the Transport of Dangerous Goods Model Regulations and Special Provision A45 of the IATA Danger-
ous Goods Regulation and the ICAO Technical Instructions. This is only valid for the original battery or original 
spare batteries.

11.3

Transport

If devices are to be shipped elsewhere, you can reuse the transport packaging. When using different packag-
ing, you must ensure that the transport requirements according to ISO 2248 are adhered to. The storage pack-
ing of the individual devices is not adequate for transport purposes.

NOTE

In this context, pay attention to the commissioning notes in chapter 6.7.

Содержание SICAM Q100

























































































































































































































































































































































































Отзывы:

Нет отзывов