Siemens SENTRON PAC5100 Скачать руководство пользователя страница 178

Страница: 178 / 266

7 Operation at Use of a PC

7.5 Maintenance

178

SENTRON PAC5100/5200, 7KM5212/5412, Device Manual

E50417-H1040-C568-A1, Edition 03.2015

7.5.3.2 Date/Time

To set the date and time, proceed as follows:

✧

In the navigation window, select the

Presets

menu and click

Date/time

Figure 7-65

Maintenance Tab, Preset Date/time

✧

You can either get the date and time from the connected computer or adjust it manually.

Get PC Date and Time

✧

In the input/output window, click

Get PC date/time

The computer time is displayed in the fields of the input/output window and applied in the device.

Setting the Date and Time Manually

(24-hour format)

✧

In the input/output window enter the desired time into the fields

Day

(format dd),

Month

(format mm),

Year

(format yyyy),

Hour

(format hh), and

Minute

(format mm).

✧

Enter the maintenance password into the

Password

field.

✧

Click

Set Date/time

The time you have entered is displayed in the fields of the input/output window and applied in the device.
The

Action was successful

indication is displayed on the status bar.

NOTE

If you want to change the date and time, you have to set the

Source time synchronization

Internal

on the

Configure



Administrative



Time synchronization

tab.

NOTE

If you want to change the date and time, make sure that any previously set

Start record option

(

Recording

parameters

tab) conforms to the newly set time. If the Start record option is earlier than Date/time, no recording

takes place and an error message is output.

Содержание SENTRON PAC5100











































































































































































































































































Результаты поиска

Содержание SENTRON PAC5100

Отзывы:

Siemens SENTRON PAC5100, Руководство по эксплуатации устройства, Страница: 178 / 266

Результаты поиска

Содержание SENTRON PAC5100

Отзывы: