Siemens SENTRON PAC2200 Скачать руководство пользователя страница 81

Страница: 81 / 130

PAC2200
Equipment Manual, 12/2019, L1V30415167B-03

Service and maintenance

7.1

Cleaning

Clean the device as required. Use a dry cloth for this.

NOTICE
Damage due to detergents
Detergents can damage the device. Do not use detergents.

7.2

Calibration

The device has been calibrated by the manufacturer before shipping. Recalibration is not

required provided the environmental conditions are maintained.

7.3

Firmware updates

The PAC2200 supports firmware updates.
An operating system update can be carried out on MID-approved devices.
When updating, always use the latest version of the configuration software SENTRON

powerconfig. For update instructions, please see the related documentation and the online

help for the configuration software. The last devices settings made remain unchanged.

Содержание SENTRON PAC2200



































































































































Результаты поиска

Содержание SENTRON PAC2200

Отзывы:

Siemens SENTRON PAC2200, Руководство по эксплуатации продукта, Страница: 81 / 130

Результаты поиска

Содержание SENTRON PAC2200

Отзывы: