Siemens SENTRON PAC2200, Руководство по эксплуатации продукта, Страница: 114 / 130

Appendix
A.1 Modbus TCP
PAC2200
112
Equipment Manual, 12/2019, L1V30415167B-03
Table A- 8 Settings parameter for the digital input
Offset Number of
registers
Name Unit Format Value range Access
50025 2 Digital input "Action" - unsigned long 0 = Status only RW
1 = Pulse input
2 = High tariff / low
tariff switching
3 = Synchronization
50029 2 "Pulse input" mode kWh unsigned long 0 = 0 kWh RW
1 = Export kWh
50031 2 Pulses per unit (pulses
per 1000 Wh / VARh)
- unsigned long 1 ... 4000 RW
50239 2 Input pulse divider kWh unsigned long 0 = 1 kWh RW
1 = 10 kWh
2 = 100 kWh
3 = 1000 kWh
Table A- 9 Settings parameter for the digital output
Offset Number of
registers
Name Unit Format Value range Access
50033 2 Switching function as-
signment to a vector
group
- unsigned long 0 ... 99 RW
50035 2 Digital output "Action" - unsigned long 0 = Off RW
1 = Device ON
2 = Switching output
3 = Phase sequence
5 = Energy pulse
50041 2 "Energy pulse" mode - unsigned long 0 = Import kWh RW
1 = Export kWh
2 = Import kVARh
3 = Export kVARh
50043 2 Pulses per unit (pulses
per 1000 Wh / VARh)
- unsigned long 1 ... 4000 RW
50045 2 Pulse length ms unsigned long 30 ... 500 RW
50147 2 Digital output timeout s unsigned long 0 = AUS
0.1 ... 18000 = Output is
reset after expiry of the
time, provided there is no
operator input.
RW
50237 2 Output pulse divider kWh unsigned long 0 = 1 kWh RW
1 = 10 kWh
2 = 100 kWh
3 = 1000 kWh